Escalarado

iTrader: (3)

Well the time has come to sell the one thing that I truly thought I would never sell. I have decided that it is time for me to move on from the show scene and pursue other auto desires that I have and in doing so don’t want to see this truck sit.

Up for sale is my pride and joy:

2001 Chevrolet Silverado ext. cab step side and currently has a tad over 60k miles and you can pretty much say that there is nothing left stock on the entire truck other than the headliner and the internals of the motor. Those that know me personally can not only vouch for the cleanliness of the truck but also the way that it has been maintained along with it. I can assure you that only the best parts and materials have been used in the building of it and all of the work is top shelf and this truck could truly be driven daily if you so choosed.

The specs:

Suspension:

Front:
ART upper and lower tubular controls arms with brand new balljoints
Mcgaughys 2 inch drop spindles
Slam specialties RE7 bags
New Wheel hubs
New Monroe Shocks
Rear:
8.5 inch Suicide Doors weld in notch
KP components 4 link with Cantilever
KP components Watts link
Slam specialties RE7 bags
New Monroe Shocks
½ inch stainless steel hardline throughout with GC 450 extreme valves
Air lift Engine Driven compressor that fills a 8.5 gallon tank
10 switch box wrapped in matching green leather
Gas tank has been raised 2 inches so it does not drag the ground

Brakes:
Baer Aluma Sport Calipers front and rear
Baer Eradispeed 14 inch slotted and cross drilled rotors
New Hawk Ceramic pads

Body Modifications:
2003 Cadillac Escalade Front end
C5 Corvette Door handles
Shaved and smoothed side steps
Shaved: third brake light, taillights with custom made taillight fillers, shaved tail gate handle, molded roll pan
Smoothed and painted dash, center console, over head console, window switches, interior handle plates
Custom wheel tubs smoothed, painted, and pinstriped that accommodate 22 inch wheels with relocated washer fluid and battery (now in the bed in an aluminum battery box that was sprayed in matching bed liner)
Cadiallac Escalade 3 piece engine cover
Street scene mirrors wth LED turn signals

Wheels
Intro billet Pentia 6s
Front: 22x8.5 with Nitto 420s 265/35/22
Rear: 24x10 with Nitto 420s 295/35/24
These wheels have been clear powder coated by Specialized coatings in Huntington Beach, CA and they literally never need to be polished. (soap, water, and roll)
Steering wheel is also an Intro Billet Pentia steering wheel that, of course, matches the wheels
Paint
Custom paint done locally by Custom Colors and is the factory GM dark green metallic and then another layer of PPG flake was applied.

Stereo:
Alpine motorized tv with IPOD hookup
TVs molded into the center console and the factory overhead console
Two pioneer 12 inch subs mounted in a custom box built underneath the rear seat
Pioneer highs in front and rear doors and everything it powered by Rockford amp

Interior:
painted dash and everything stated in the body mod section and also have Katzkin tan leather interior with dark green inserts and matching leather in the door panels
I know there are several other things that I am forgetting and if you have any questions please feel free to ask.

The price is $30,000 obo and the truck is paid for with the title clear and in hand.

Whoever gets it will have one hell of a truck on their hands.

And I also wanted to remind everyone that the truck was featured in the July Issue of Trukin’ in 2006

I also have numerous build photos of every single stage from the very beginning if they need to be pprovided to show the extensive work that has been done

00Silv4.8

iTrader: (10)

Wow beautiful truck even with huge wheels! Haha good luck with the sale tho

gmc6.0

hey very nice truck where did you get that three piece engine cover

BuiltNotBought

iTrader: (7)

Awsome truck! Loved it when I saw it in Truckin. GLWS