1970 Chevy C/10 project truck
Nov 24, 2007 | 02:24 PM
#1
1970 Chevy C/10 project truck
I started restoring this truck before I joined the military. Now my dad needs the storage space so this should make a nice project for someone else.
Originally the truck was a 350/three-on-the-tree but now the trans and steering column are gone all other parts are there. Comes with wore out/half taken apart 350. 12 bolt 3.08 open rear end. The body is in ok shape for coming from MN, needs rockers, cab corners and a D/S floor. Bed could be allot better, but can be saved, needs new floor(floor is currently made from 1x10s) and a few dents fixed. Rear frame and suspension have been rebuilt, good trailing arms with poly bushings and track bar with poly bushings, new shocks all around. Dual exhaust with long tube headers and glass packs. Factory seat rebuilt and recovered in black vinyl. Truck is located in Ivanhoe, MN. $400 feel free to make offers.
Originally the truck was a 350/three-on-the-tree but now the trans and steering column are gone all other parts are there. Comes with wore out/half taken apart 350. 12 bolt 3.08 open rear end. The body is in ok shape for coming from MN, needs rockers, cab corners and a D/S floor. Bed could be allot better, but can be saved, needs new floor(floor is currently made from 1x10s) and a few dents fixed. Rear frame and suspension have been rebuilt, good trailing arms with poly bushings and track bar with poly bushings, new shocks all around. Dual exhaust with long tube headers and glass packs. Factory seat rebuilt and recovered in black vinyl. Truck is located in Ivanhoe, MN. $400 feel free to make offers.
Last edited by usmcchevy; Nov 25, 2007 at 12:19 PM.
Up for the week!
Thread
Thread Starter
Forum
Replies
Last Post
