Lq4 sled pulling setup
02-08-2016, 01:18 PM
#1
Lq4 sled pulling setup
I'm looking at doing sled pulls with my lq4 and curious what I can do to give it a little more power. Nitrous is not allowed, but a turbo is. Im just looking to add a little more to it, any suggestions ?
02-08-2016, 05:24 PM
#3
hmmm never thought of a budget. I am leaning towards a turbo setup though, so in the $2500 ballpark ?
Only missing a few things for the turbo setup - intercooler, turbo, bigger injectors (what are the stock ones good till?).
I have the wastegate, blowoff valve, wideband o2, exhaust tubing, exhaust flanges.
Turbo specs - Compress Trim 69; .66A/R; IND 68.70MM; EXD 97.80MM
Turbine Trim 92; 1.05 A/R; IND 87.40MM; EXD 77MM
Any way of telling when this would spool ?
Only missing a few things for the turbo setup - intercooler, turbo, bigger injectors (what are the stock ones good till?).
I have the wastegate, blowoff valve, wideband o2, exhaust tubing, exhaust flanges.
Turbo specs - Compress Trim 69; .66A/R; IND 68.70MM; EXD 97.80MM
Turbine Trim 92; 1.05 A/R; IND 87.40MM; EXD 77MM
Any way of telling when this would spool ?
Thread
Thread Starter
Forum
Replies
Last Post