Damn, thats nice, real clean, it flows. Real smooth. Some people over do it with huge tires and mean lookin' tread on the tires, like that Durango, thats too much, I like sexy curves.

 

any one have pix with just body lifts, with stock wheels and tires?

 

6Inch fabtech suspension 35/12.50/20s riding on toyo m/t and KD Series Diesels

 

Thats a sweet looking ho

 

I have 305x65 or 75 R16 GY MTR on my 2003 GMC Z71 and they did not rubb without a lift. I just lifted my truck 3" in the front with no ford keys of anything all I did after looking under the truck is bought two new bolt which are m12 1.75x85 which are 1 inch longer then the factory. Cranked my torsion bars up all the way untill the key hitting the top of my cross member bar. That alone gave me 3 inches now I'm just waiting for the 2 in add-a- leaf to get in. I also had to weld a plate under each rubber stoper in the front because with the lift there ended up being 1-1/2 between the stopper and the a-arm which left the ride to bouncey for my likings.

 

Thanks man, my torsion keys still have about an inch of thread showing, if i wanted i could throw a 6inch block in the back turn up the bars and have an 8 inch but i dont wanna bounce all over the road so im leaving it alone.

 

couple more of mine

 

Like what, the 218 mud bog? I know you must take that thing to middleburg and play.

 

2006 GMC Sierra Z71 SLT









The frame was sitting on the ground and the front end was digging into the mud. I have gone through this spot a few times before but this time the narrow row of mud i was on top of gave way and my truck slid into the deep rut.

 

What kind of lift kit is that, to u add anything to the kit