05sierraon24s

iTrader: (-1)

I got my 3 inch drop leaf springs in.. so i have the springs and shackles for a total 5 inch drop in the back.. and the driver side looks lower then the pass. side.. will it even out after the springs settle or over time.. i kinda read about this lean before but i forgot what everyone was sayin about it and i wanna kno if i can fix it or if it will fix it self.. thanks guys!!

mwalls54

give it some time to settle. then if it still leans you might have to have your springs rearched a little bit.

Chevy Cowboy

iTrader: (5)

lol kinda off topic but why is this in the Offroad section?

05sierraon24s

iTrader: (-1)

cuz its the only section with suspension in it....
so today i took out the pass. side bump stop just to see how it looks and its level... so my question is.. can i leave the stock bump stop on the driver side and use a small bump stop on the pass. side??? (and be safe and not mess anything up)

shakesvho

iTrader: (1)

are you saying you are riding on the bs right now

05sierraon24s

iTrader: (-1)

yup.. so what should i do??? leave one stock and onw small or is there another way to fix this!!

StrokerAce03

iTrader: (7)

Cut the bump stops to where you have at least 2" of clearance between the axle and the stops. Riding on the bump stops is going to feel horrible on a bad road.

05sierraon24s

iTrader: (-1)

yeah.. i just got some small bump stops from AIM industries so i sould be good.. and im just gonna raise the driver side with the shackle..