Calling out all Ms trucks!!!!!
#21
hey randy, i am gonna bring the bfg's for you to ride on at the track if you don't have tires. i plan on using jeremy's et streets. also, jim (tntrk) and luke might make the trip down from the north to come play as well.
#22
Randy, if you want to try some 26x11.50 ET Streets, I will send them up with John. I doubt I will be using them anytime soon. Even after I get the new motor in, I doubt they are going to get the job done for me anyway.
#23
Thread Starter
TECH Addict
iTrader: (1)
Joined: Aug 2002
Posts: 2,951
Likes: 1
From: Pearl, Mississippi
Originally Posted by BigKID
Randy, if you want to try some 26x11.50 ET Streets, I will send them up with John. I doubt I will be using them anytime soon. Even after I get the new motor in, I doubt they are going to get the job done for me anyway.
#24
Will do! Just try not to burn too much life of of them.
They really dont need a big smokey burnout. Just quickly run it thru first and let it shift to second. Hold it at ~5K for ~3sec or untill you start to see the white smoke comming of of them. Let off of the break and the gas and let the truck roll out till they grab on their own. I also run them between 16-18psi. You may want to start at 20 and go down from there though.
They really dont need a big smokey burnout. Just quickly run it thru first and let it shift to second. Hold it at ~5K for ~3sec or untill you start to see the white smoke comming of of them. Let off of the break and the gas and let the truck roll out till they grab on their own. I also run them between 16-18psi. You may want to start at 20 and go down from there though.
#25
Randy and John better bring their A game with them!!! I'm stirring up plenty of **** around here, so you better be ready to lay down the times!!!
You guys are just too damn lucky Kenny's truck and dirty are both down!!!
John....I got a race for you if you're willing to put up that fresh 4l60e/converter setup on the line.
Offer stands for that flp of yours too, Randy. I wouldn't set you guys up or anything.
You guys are just too damn lucky Kenny's truck and dirty are both down!!!
John....I got a race for you if you're willing to put up that fresh 4l60e/converter setup on the line.
Offer stands for that flp of yours too, Randy. I wouldn't set you guys up or anything.
#26
i'll run anyone. i dont' care. if i lose i lose. just make sure your et streets are ready to go jeremy.
i hope this cool air stays. i really want to see some nice motor times as well as on spray. i know randy could use the crap outa this cold air.
i hope this cool air stays. i really want to see some nice motor times as well as on spray. i know randy could use the crap outa this cold air.
#29
Thread Starter
TECH Addict
iTrader: (1)
Joined: Aug 2002
Posts: 2,951
Likes: 1
From: Pearl, Mississippi
Originally Posted by goshawk23
randy where you at.




