Anyone want to help with Cam swap this Saturday at my house in Westside Fort Worth
Jun 15, 2008 | 07:20 PM
#45
Thread Starter
Resident Retard
iTrader: (31)
Joined: Jan 2006
Posts: 17,216
Likes: 20
From: Fort Worth - TX
Actually, I am sure I will get flamed or BS called, but the cam drives like stock or better in the low to mid range areas, in very light throttle (GF in truck mode)..... Agressive part throttle feels alot better, and WOT is freaking sweet!!!! a verter would help, but it is not like everyone says that it would be an absolute dog off the line, and all of that is in 105* or greater temps.... During the day the truck suffers from the heat, I am going to take it out tonight when it is cooler to see how it feels...
Jun 15, 2008 | 07:35 PM
#46
Actually, I am sure I will get flamed or BS called, but the cam drives like stock or better in the low to mid range areas, in very light throttle (GF in truck mode)..... Agressive part throttle feels alot better, and WOT is freaking sweet!!!! a verter would help, but it is not like everyone says that it would be an absolute dog off the line, and all of that is in 105* or greater temps.... During the day the truck suffers from the heat, I am going to take it out tonight when it is cooler to see how it feels...
Jun 15, 2008 | 07:38 PM
#47
Thread Starter
Resident Retard
iTrader: (31)
Joined: Jan 2006
Posts: 17,216
Likes: 20
From: Fort Worth - TX
I will say this thou, there are a few spots where it takes a bit more throttle to go, I think I just need to up the timing in those areas to get it back... I will get it dialed in over time, lots of logging.....
Jun 15, 2008 | 09:12 PM
#50
yes sir, got some 27x 10x 15's hooser qt pro dot's. sorry david, no 16's. I hear yours is a beast now....you need slicks!! find some 16's and some used slicks like I did. craigslist is your best friend. most of the guys I deal with on slicks are good ole' boys that need a quick $100.
