Truck to a good home
02-03-2018, 09:08 PM
#1
Truck to a good home
2003 Silverado
Engine:
Magnuson TVS1900 making ~11 psi
Custom Cam – 212/220 .553/.553 112LSA
LS6 valve springs
BTR hardened pushrods
1-3/4 stainless headers
Stock 3.5 Duramax exhaust
PVC catch can
Walbro 255 in tank pump
Trans:
4L80
Yank 2800 Multidisk converter
Billet shafts
Dual feed pump
40k cooler
Other:
2006 Hood / Grill
Hydroboost conversion
Bilstein struts
Moog wheel bearings, tie rods, ball joints, idler arm, pitman arm, less than 20k miles old
Custom steel driveshaft
Sunroof / Leather interior
18x10 -44 Raceline Renegade
285/60 Kuhmo tires
Truck needs a custom front driveshaft if you want to launch it in 4wd.
Headliner needs work, doesn’t really bother me. 170,000 miles
15,000
Engine:
Magnuson TVS1900 making ~11 psi
Custom Cam – 212/220 .553/.553 112LSA
LS6 valve springs
BTR hardened pushrods
1-3/4 stainless headers
Stock 3.5 Duramax exhaust
PVC catch can
Walbro 255 in tank pump
Trans:
4L80
Yank 2800 Multidisk converter
Billet shafts
Dual feed pump
40k cooler
Other:
2006 Hood / Grill
Hydroboost conversion
Bilstein struts
Moog wheel bearings, tie rods, ball joints, idler arm, pitman arm, less than 20k miles old
Custom steel driveshaft
Sunroof / Leather interior
18x10 -44 Raceline Renegade
285/60 Kuhmo tires
Truck needs a custom front driveshaft if you want to launch it in 4wd.
Headliner needs work, doesn’t really bother me. 170,000 miles
15,000
The following users liked this post:
GM1697 (02-07-2018)
Thread
Thread Starter
Forum
Replies
Last Post
goshawk23
Southern
20
09-17-2006 11:36 PM