haulin-c10

I am looking to boost my 5.3 in my 2000 Chevy ext cab. I've been looking at on3 performance, trick, Huron, cx racing, and some others. What experience do you guys have for these kits for the 99-06 trucks? Which turbo setup is better journal or ball bearing? I'm looking to run around 8-10 psi on a 70 or 76mm. Thinking the 76 for room to grow in the future. Still looking at a/r right now. My power level is 450-500 to the wheels. If you can post some pics of the install. If I can get some suggestions I would appreciate it.

TrickTurbo

iTrader: (12)

We offer many levels of kits. Depending on power level and how much the customer wants to do in their own. We offer complete kits with injectors to entry level kits for the budgeted person. Just trying to get into boost.
For your power level an entry kit or our stage 3 would get you covered.

TrickTurbo

iTrader: (12)

beaner

He's aware of you, hence the thread.

haulin-c10

Does your kit offer the driver's side manifold? I like your hotside piping.

TrickTurbo

iTrader: (12)

We can supply a driver side manifold if you need one. It’s just at an added cost.

TrickTurbo

iTrader: (12)

Here to help. Might not know the options we offer.
We have been getting calls to asking about more then just what’s on the site.

haulin-c10

Does your intercoolers have the inlet and outlets going down to the bottom or is it all on the sides?

TrickTurbo

iTrader: (12)

Those years the intercooler outlets are aimed down
We route the piping inside the frame and under the core support.

beaner

Ok, but then he would have directly contacted you, no? I think the thread is asking for unbiased opinions on multiple different kits.

And I don't mean to be a dick and single you out, as seems every other thread on here has some sort of shilling. I've never seen such a thing on a forum and it's really compromising the content.