Tear down and Re build...
#1
Launching!
Thread Starter
Tear down and Re build...
So after putting my cheap Ebay turbo through the paces I decided to tear it all down and build the motor back up. shooting for 600rrwhp this time around on pump gas. here is a list parts that I will be upgrading to,
-BorgWarner S471 7175 billet
-Cam Motion custom turbo cam
-Morel lifters
-Manley Pushrods
-trunion kit
-PAC1218 springs
-Cylinder head work
-LS9 Headgaskets
-Taylor pro 10.4mm plug wires
-Still going to run my 60lb injectors
-Lots of powder coating and heatshield products
Only thing I would like to figure out, is finding a drop in fuel pump. I don't want to hack up my bucket all up.
Tear down is going to start next week sometime, Ill get pictures up as I go.
-BorgWarner S471 7175 billet
-Cam Motion custom turbo cam
-Morel lifters
-Manley Pushrods
-trunion kit
-PAC1218 springs
-Cylinder head work
-LS9 Headgaskets
-Taylor pro 10.4mm plug wires
-Still going to run my 60lb injectors
-Lots of powder coating and heatshield products
Only thing I would like to figure out, is finding a drop in fuel pump. I don't want to hack up my bucket all up.
Tear down is going to start next week sometime, Ill get pictures up as I go.
Trending Topics
#8
Launching!
Thread Starter
Thanks!