Siemens Deka 47 lb/hr injectors
Dec 18, 2016 | 01:10 PM
#1
Thread Starter
Staging Lane
Joined: Jul 2016
Posts: 87
Likes: 0
From: SLC, Utah
Siemens Deka 47 lb/hr injectors
Siemens Deka LS2 47 lb/hr injectors. I picked these up a few months ago to swap into my truck intake manifold and run N/A on my 370ci build.
They are slightly taller than the factory truck injectors but should work with the fuel rail spaced up roughly 1/4". These are a direct swap for an LS2, or an engine using an LS2 intake manifold. I will also include the injector harness adapters to adapt them to a truck plug.
I mocked up 2 of the injectors on a truck manifold and rails, the orings are a little tight, but it does work. The other 6 injectors are unopened, exactly how I received them. These are "used" but have been fully tested and function 100%. Looking to get $215 shipped anywhere in the 48 states for injectors and connectors. PayPal only.
Here is a link to my profile on a Duramax forum so you can see I am very reputable, and not here to rip anyone off. http://www.duramaxdiesels.com/forum/member.php?u=14736
Additional info below from the company I bought them from.
They are slightly taller than the factory truck injectors but should work with the fuel rail spaced up roughly 1/4". These are a direct swap for an LS2, or an engine using an LS2 intake manifold. I will also include the injector harness adapters to adapt them to a truck plug.
I mocked up 2 of the injectors on a truck manifold and rails, the orings are a little tight, but it does work. The other 6 injectors are unopened, exactly how I received them. These are "used" but have been fully tested and function 100%. Looking to get $215 shipped anywhere in the 48 states for injectors and connectors. PayPal only.
Here is a link to my profile on a Duramax forum so you can see I am very reputable, and not here to rip anyone off. http://www.duramaxdiesels.com/forum/member.php?u=14736
Additional info below from the company I bought them from.
USED Set of 8 Siemens Deka injectors 47lb/hr fuel injectors
All new o-rings
Cleaned, flowed and tested on our certified ASNU injector flow bench
Direct fit for LS2 intake manifold, same LS2 uscar connector (no spacers or adapter required)
Corvette, GTO, CTS-V
Small spacers are required for the Trailblazer SS. These injectors are rated for 47lb/hr @ 43.5psi.
High impedance for use with stock computers
All new o-rings
Cleaned, flowed and tested on our certified ASNU injector flow bench
Direct fit for LS2 intake manifold, same LS2 uscar connector (no spacers or adapter required)
Corvette, GTO, CTS-V
Small spacers are required for the Trailblazer SS. These injectors are rated for 47lb/hr @ 43.5psi.
High impedance for use with stock computers
Last edited by Ray Finkle; Dec 18, 2016 at 01:17 PM.
