About 200 less than the whipple

 

93 octane. Hi 20's for timing.

 

Meanie.

 

I say low 400s

 

On the dyno now. ::


367hp/353tq

 

Not what I was hoping.

 

Shoot

 

Thats still pretty strong for a NA 370 with a mild cam.

 

I overestimated the heads... but its still pulling. 5800 is not near enough RPM for that cam. Feed it a tad more timing as it continues to rev and it will make more steam. I would start adding in small increments at 5400 or so.

Also what is the MAP reading as you get up there in the revs. A little bit of vacuum can kill top end power too.

 

Was the run aborted for some reason?

What did Kyle think it would make?