November '08 TOTM: Black X
Nov 1, 2008 | 05:15 PM
#1
Thread Starter
2nd fastest 5.3 ECSB
iTrader: (14)
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
November '08 TOTM: Black X
Black X
This Is Betty, AKA Black Betty A 2002 Chevrolet S-10 Xtreme.
I ordered the truck in December of 2001 Optioned as a 2.2L 5-Speed.
Hoping some day it would have V8 Power.
Some Exterior enhancements took place right away.
Goodmark Steel 2.5” cowl hood, Centerline Galaxy wheels and Head and taillight blackouts.
A soft extanng tonneau cover topped off the bed.
My First track outing came soon and I blistered the quarter mile at a 19.00@71mph.
Disappointed with the results I began modifying the 2.2L Basic bolt ons were preceded by a NX nitrous lit and then Finally the last large effort with the 2.2L was to get a Supercharger.
I worked closely with Al Martin of Wynjammer Superchargers in Arizona to develop a supercharger kit for the 2.2L S-10.
The result was pretty impressive. Stock the truck dyno'd 84RWHP on a mustang dyno and before the 2.2L was removed it was making 174RWHP and 202TQ on 8psi and a 35 shot.
Here is a photo of the 2.2L combination.
In the Fall of 2005 I decided The 2.2L was set to be replaced with a 5.3L and the V8 swap began.
I pulled the truck into the Garage for the last time under 2.2L power NOV 1,2005.
In april of 2006 the Cam only 5.3L 4L60E combo left the garage on its maiden voyage.
After a summer of tweaking at the track the truck had run 12.90 on motor and 11.27@123 on a 200 shot.
I then built a heads cam 6.0L with nitrous for the 2007 season.
It went to a best of 11.68@117 and 10.66@128 on a 200 shot.
That brings us to the current combination.
Performance: 697RWHP 636RWTQ 13psi
Transmission:
Suspension:
Interior Modifications:
DYNO VIDEO
9.88 VIDEO
EVERYONE LIKES BURNOUTS.
Huge thanks to the people that nominated me, all my family for their continued support. Finishline Transmissions and Yank Converters for a solid transmission combination.
More boost for 2009!
This Is Betty, AKA Black Betty A 2002 Chevrolet S-10 Xtreme.
I ordered the truck in December of 2001 Optioned as a 2.2L 5-Speed.
Hoping some day it would have V8 Power.
Some Exterior enhancements took place right away.
Goodmark Steel 2.5” cowl hood, Centerline Galaxy wheels and Head and taillight blackouts.
A soft extanng tonneau cover topped off the bed.
My First track outing came soon and I blistered the quarter mile at a 19.00@71mph.
Disappointed with the results I began modifying the 2.2L Basic bolt ons were preceded by a NX nitrous lit and then Finally the last large effort with the 2.2L was to get a Supercharger.
I worked closely with Al Martin of Wynjammer Superchargers in Arizona to develop a supercharger kit for the 2.2L S-10.
The result was pretty impressive. Stock the truck dyno'd 84RWHP on a mustang dyno and before the 2.2L was removed it was making 174RWHP and 202TQ on 8psi and a 35 shot.
Here is a photo of the 2.2L combination.
In the Fall of 2005 I decided The 2.2L was set to be replaced with a 5.3L and the V8 swap began.
I pulled the truck into the Garage for the last time under 2.2L power NOV 1,2005.
In april of 2006 the Cam only 5.3L 4L60E combo left the garage on its maiden voyage.
After a summer of tweaking at the track the truck had run 12.90 on motor and 11.27@123 on a 200 shot.
I then built a heads cam 6.0L with nitrous for the 2007 season.
It went to a best of 11.68@117 and 10.66@128 on a 200 shot.
That brings us to the current combination.
Performance: 697RWHP 636RWTQ 13psi
- 370 Cube Iron block
- Compstar Rods
- Diamond Pistons
- Trend H-13 tool steel pins
- Comp Cam 228/230 .571/.573 112LSA
- Patriot Stage II LS6 Heads
- Yella Terra Ultralite Rockers
- Tony Mamo ported 90MM FAST
- Nick Williams 90MM TB
- Cleavite Bearings
- ARP Studs
- Custom Rear Mount turbo system
- Precision T76GTS
- Tial 44MM Wastegate
- Tial 50MM BOV
- Custom Boost Referenced Nitrous system
Transmission:
- Yank SS 3600 Converter
- FLT Level 5 4L60E
- Billet output shaft
Suspension:
- Eibach Front Springs
- QA1 Adjustable shocks
- Calvert Racing Mono Leafs
- Comp Eng Slide-A-Links
- Currie Enterprises 9"
- 3.55 gears
- MT 295/65/15 Drag radial
Interior Modifications:
- B&M Hammer shifter
- Autometer Carbon Gauges
- 8-Point Roll Bar
- Panasonic Head Unit
- Clarion 550W 4 Channel
- Clarion 400W 2 Channel
- JL Audio Speakers
- JL Audio 10W3 Subs x 2
DYNO VIDEO
9.88 VIDEO
EVERYONE LIKES BURNOUTS.
Huge thanks to the people that nominated me, all my family for their continued support. Finishline Transmissions and Yank Converters for a solid transmission combination.
More boost for 2009!
