I've tried to come up with some package deals on my parts that you can't pass up!:

Magnacharger Radix - 10K miles. You get 3.7, 3.25 & 3.00 pullies. Brand new fuel pump to fit your application and I will send off the Superchips tuner and have it tuned for your truck. I will install if you'd like and can arrange to have a custom street tune with wideband by Gomer(gen3performance.net) at the time of the install. If you choose to do this then I will knock off $175 which would go towards Gomer's $250 charge for unlimited updates. The custom tune would only be possible if Gomer agrees to it and has the software rights for your vehicle of course.
$4200 Installed w/ Magnacharger tune, new fuel pump & stock heat exchanger.
$4200 Shipped w/ Magnacharger tune, new fuel pump & stock heat exchanger.
$200 extra for Large upgraded Hx & fan (this will not be sold seperate)

Ceramic Coated Pacesetter Long tubes for 4.8-6.0 2wd trucks and Off road Y pipe - 7K miles
$350 Installed
$350 Shipped

Lunati 216/224 .558 114 lobe sep - You will need 7.400 pushrods and comp 918 springs(or equivalent) that you provide & I will install with the cam install.
$450 Installed
$250 Shipped

Radix with upgraded Hx with fan, Headers & y pipe & Cam -
$5000 Installed
$4800 Shipped

I would have to have a 10% non-refundable down payment via paypal for the parts to be installed. I want to try to sell this as a complete kit first. As of right now it is not available seperately. I will make it availiable seperatly in a few days if I have not sold the kit. Post up here to claim certain parts so everyone knows what the order of chance to purchase will be.

Thanks,
Mark Howard

 

I would like first dibs on the Pacesetters and OR y-pipe, if you decide to seperate.

 

bump!

 

So are you going to sell them seperate?

 

I will sell them seperate if I haven't sold everything as a kit or partial kit including the supercharger within a few days. I'm in no big hurry. I want to give enough time for everyone on here to see it before I start piecing it all out. You are second in line for the headers and y pipe.
Thanks,
Mark

 

Here are some pics of the headers/y-pipe



Ill pull the cam out of the motor and put some pics of it up for him.

 

i got 2nd dibs on the Pacesetters and OR y-pipe if Element 80 falls through.

 

The black on the headers is the undercoating off the frame. I whiped it off already. There are several scratches from installation but no dents. I had to cut the y pipe when I took it off because the clamps squeezed too hard and it wouldn't slide off. No problem to weld them back together though once you get them on.

 

can that cam be tuned by a mail order?

 

I don't see why not. The main problems we had was some idling issues because of the drive by wire on mine. Yours shouldn't be that big of a deal. It is a noticable choppy idle. Nothing too drastic. I have a proven combo for a 4.8 and gomer has the tune. It is just what you need.