Valve Covers and Coil Relocation
#16
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
This is for everything as shown in the first picture. This is for the LS2 so the Coil Relocation Brackets would have different mounting holes drilled for your coils. The mounting hardware will be all stainless steel. I was expecting it to be less, I might be able to get the price down a little more with a group order.
Billets Valve Covers:
Tall (2") 375.00
Regular(1 1/4") 325.00
Coil brackets:
Relocation brkts 89.00/pair
Billet screw on filler cap 40.00/installed
Billets Valve Covers:
Tall (2") 375.00
Regular(1 1/4") 325.00
Coil brackets:
Relocation brkts 89.00/pair
Billet screw on filler cap 40.00/installed
#19
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
On the trucks you could just mount the stock coil brackets on the inner fenders to cut the cost of the relocation brackets. The trucks have a lot more room to play around with as compared to the SSR. I did them this way so it will still use the stock length spark plug wires. You can also mount them on the firewall if you do a longer set of low restriction plug wires.
#20
FormerVendor
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Here is the regular list price: Special price:
Billets:
Tall (2") 375.00us 320.00us/pair
regular(1 1/4") 325.00us 280.00us/pair
Coil brackets:
relocation brkts 89.00us/pair 79.00us/pair
Billet screw on filler caps:
40.00us/installed
I wont sell these yet until I make sure they are perfect. I will also be a sponsor on this site next month to make sure it is all legal. I just wanted to show the progress.
Billets:
Tall (2") 375.00us 320.00us/pair
regular(1 1/4") 325.00us 280.00us/pair
Coil brackets:
relocation brkts 89.00us/pair 79.00us/pair
Billet screw on filler caps:
40.00us/installed
I wont sell these yet until I make sure they are perfect. I will also be a sponsor on this site next month to make sure it is all legal. I just wanted to show the progress.
Last edited by leftcoast32; 12-07-2005 at 08:54 AM.