ok for those who don't know this is my truck. i'm thinking bout lowering it a bit more. right now it is a 3/6ish drop but it is not c-notched so i rear will be going down a bit more due to the fact that the rear is sitting on the frame. i'm c-notching it in a few weeks. but i wanted to get some opinion on if i should go lower. i was thinking about going with a 4/7 with a 255/45 up front and a 295/45 in the back. but with the offset of the wheel it won't fit a 295 in the back with that drop. so then i was this going with a 255/45 all around. or should i do a 4/6 with 245/50 up front with a 275/45 in the back. or run all 275/45. and should i even lower the front any more.

 

IMO just lower the back. The front looks good just even the back out. 1 maybe 2 inchs at the most. And i think 245 in front and 275 in the back

 

i think it looks great the way it is... Only thing i would change is the grille. maybe an all black grille....

 

And tinted tail lights

 

i was thinking bout taking the grille out and color matching the grille shell and bumper. you all think it would look good with a 245/50 up front

 

What size tires is on it now?

 

275/45 all round, a 245/50 is the same diameter

 

Yeah id put the 245/50 on the front and paint the grille, tint the tail lights and maybe lower the back an inch or two

 

I agree... just lower the back 1" or 2" and your set

 

i think i'll just c-notch it and see how it looks. but i need new tire now i just dont know how a staggered tire would took