I lowered the SS today with Belltech 2" drop shackles and I did a torsion bar ajustment up front for a 1 inch drop. Its lowered 1"/2" it seems to ride better than it did before. Im going to polish the SS emblems tonight and wash and wax the truck. So ill have some pics of it tonight. Anyone lower their SS this way? What do you think about lowering it like this? I measured from ground to the top of the wheel well before and after. the front end was 3" higher on the passenger side than on the driver side before I started. Now the front sits @ 34.0" (left and right) and the rear sits @ 35.0"(left & right). From (front)35.25"left and 38" right, (rear) 37.25" left 37.25" right. I did this on level ground so it should be ok. What do you guys think?

 

Need pics but sounds good..

 

i lowered mine with the mcgaughys kit. spindles in front...shackles and hangers in back. rides nice..looks great...i am workiing on getting a set of sway bars that will fit as well...make it handle even better...

 

do we have pics yet captain?