i got my t-handle from dodge i get discounted parts, ok heres whats goin down, for the front i have 02-05 3 inch drop springs, 2 inch drop spindles and we are cutting the spring pocket and moving it down an inch, the back belltech 4 inch drop springs, a cnotch moving the spring pocket up 2.5 inches and cutting half a coil, all without cutting the bed up, only thing we have to do to the bed is grind the perch welds... alot of work will post up pics when done should be a couple of weekes though gotta find the time

 

Okay was it hard to change the handle? Is there a thread that has all the R/T guys and pics of the trucks? I called myself lookin but just wanted to ask.

 

That is the kit I have on the way...

 

I started a FB group way back when for Ram R/T guys: Log In | Facebook

 

The dodge section on here might come alive with all these new R/T owners

 

^ I hope so this is about the only forum I get on cause it has a mobile theme.. I'm still trying to get used to not pulling up to curbs tho lol this is my first lowered truck last had a 6 inch lift lmao

 

Yeah, might be cool. Most dodge sites blow.

 

it was pretty easy, take a small flat head and seperate the chrome piece it slides down. then the prongs holding the handle on stick the flat head in there and twist it and it should slide right off

 

Request sent!


Need to start up a roll call thread in the Ram trucks section see who all is on here.


Thanks!

 

Those R/T's are awesome as is, but that looks great! Very nice.