I want to swap 03-06 seats in my 2000
Mar 26, 2009 | 12:43 PM
#11
Thread Starter
TECH Senior Member
iTrader: (27)
Joined: Jul 2004
Posts: 12,275
Likes: 19
From: Dallas
I swapped my cloth interior out of my wife's Yukon for leather. I got the mirrors, door panels, seats, and console. If you get the whole wiring harness it will all plug in and work like it was optioned that way in the beginning. Get all the wiring that running the floor board and when swapping the interior out swap the harness out and plug it up like it was in the donor truck and you will have no issues
May 15, 2009 | 07:21 AM
#13
TECH Fanatic
iTrader: (5)
Joined: Nov 2008
Posts: 1,000
Likes: 0
From: Arkansas
If you get the whole wiring harness it will all plug in and work like it was optioned that way in the beginning. Get all the wiring that running the floor board and when swapping the interior out swap the harness out and plug it up like it was in the donor truck and you will have no issues
May 15, 2009 | 04:43 PM
#17
Do they make cloth captains? If so, you could always get some Katskins if you came across a set cheap enough. I want captains chairs for my truck eventually, my center console is too low to rest my arm on.
May 15, 2009 | 04:44 PM
#18
I will be doing this soon. But for now I need to figure out which wires power the passenger side seat. I got the driver figured out, (Thanks to a very helpful right up!!!!!) I just can't find the passenger power wire. Does anyone have any pics or just know what color?
May 17, 2009 | 04:59 PM
#20
I got a set off of ebay for $100 and recovered them with katskinz. my drivers side was power and pass was manual, but the frames were rusty and bent so I just swapped the bottom frames and cushions from my truck with the new seats. Results:
Thread
Thread Starter
Forum
Replies
Last Post
Shtbox
GMT 800 & Older GM General Discussion
2
Aug 2, 2015 10:52 PM
