Rst vs hemis
#12
unless he knows how to use the shifter and manually shifts it. If he just leaves it in drive there is something like a 2 second delay in it.
#16
TECH Enthusiast
Join Date: Oct 2007
Location: HOUSTON, TX
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Here is Nicks NNBS 5.3L, 220/220 cam, Full bolton Single cab vs a stock 2009 Dodge ram R/T
2009 Dodge Ram R/T .vs. 2007 Silverado Street Racing - YouTube
2009 Dodge Ram R/T .vs. 2007 Silverado Street Racing - YouTube
#18
TECH Fanatic
iTrader: (1)
Here is Nicks NNBS 5.3L, 220/220 cam, Full bolton Single cab vs a stock 2009 Dodge ram R/T
2009 Dodge Ram R/T .vs. 2007 Silverado Street Racing - YouTube
2009 Dodge Ram R/T .vs. 2007 Silverado Street Racing - YouTube
#19
It's shifts real good on the programmer, it'll go into 1st from 35, it shifts right at 6000, rev limiter is at 6200 and his is just a hemi, no r/t
Last edited by jgh64pkup; 03-21-2012 at 02:57 PM.
#20
TECH Fanatic
iTrader: (1)
See when my Denali was cammed and had a custom dyno tune and as well as the tranny if I raced at a 20 roll it still takes 2 to 3 seconds to down shift on its own but when I dropped it to low 1 damn it had a meaner respond You'll be surprise how lowering the gears will make vs keeping it on D from a roll