I beat my boss
#17
3600 seems to please most drivers here, they all start with 3000 and move on up to that. and unless they move on to a tailer queen it appears they stick with it.
That truck will be insane with that stall! do you have slicks yet?
That truck will be insane with that stall! do you have slicks yet?
#18
Thread Starter
Wearin' da big hat
iTrader: (10)
Joined: Jan 2008
Posts: 10,262
Likes: 9
From: Over There
nope, but I'll deff need some if i ever plan on going WOT from a stop 
you guys think I could get into the 12s without any headwork?
I'm wanting to get the tranny built up pretty good, some traction bars made, some 16's with slicks, and the 3600 converter.
I'm guessing I'm running about a 8.9/9.0 or a 13.9/14.0 for you 1/4 mile guys.

you guys think I could get into the 12s without any headwork?
I'm wanting to get the tranny built up pretty good, some traction bars made, some 16's with slicks, and the 3600 converter.
I'm guessing I'm running about a 8.9/9.0 or a 13.9/14.0 for you 1/4 mile guys.
#19
#20
Thread Starter
Wearin' da big hat
iTrader: (10)
Joined: Jan 2008
Posts: 10,262
Likes: 9
From: Over There
I know I've got at least 3 or 4 tenths in my 1-2 shift that I can work out with the built tranny.
Mine takes about .7 seconds to shift, and coreys (blackgmc) shifts in .4/5ish with just a shift kit and servo. I need a built tranny so bad
Mine takes about .7 seconds to shift, and coreys (blackgmc) shifts in .4/5ish with just a shift kit and servo. I need a built tranny so bad


