videos from, last night

Me vs. Hemi ram w/ hypertech programmer, exhaust, AEM intake
Said he had 415 stock HP so i dunno what he really had but i would say closer to 350

And a mustang GT w/ 10" wide tires, 3.73's, intake, full exhaust

http://videos.streetfire.net/video/9...E3F5F8D4F3.htm

 

NIce Kill. What do you run in the 1/4 with that thing?? That would have to be one of the best sleepers I have seen in a long time.

 

lol its getting gears and full exhaust next month along with a 100shot so look out-

i ran 9.37 @ 74mph on a 75 shot, intake, and pullies- so im hoping for 8.6 to 8.8 in the 1/8th when i go back next weekend- ive added cat-back exhaust, e-fans, traction bars, tires, 100shot and a progressive controller

 

1/8th mile times are greek to me. What does that translate to in a 1/4??

 

low to mid 14's so im hoping on mid to high 13's on the mods i listed above most likely high 13's- 9.37 = around 14.4

 

thats real good for a blazer. can't wait to see your new times at the track

 

I'll tell right now, the Hemi guy is dreaming if he thinks he's got 415 hp from a tuner, CAI and exhaust. The SC is good for about 15 hp in the 91 tune and a 4.-.5 reduction in 1/4 times. The CAI and exhaust may be good for about 10 hp combined and 1.-.2 reduction in the 1/4. DTW has an AEM CAI and Flowmaster install on their main page on a Hemi Ram. The AEM was good for 7-8 hp and the Flowmaster was only good for 2-3 hp. So, he's got about lot less than he thinks. Good kill!
Jim