5.2 98 dakota vs 01 5.3 chevy

Thread Tools
 
Search this Thread
 
Old Jan 22, 2006 | 12:20 AM
  #1  
Tool's Avatar
Thread Starter
Teching In
 
Joined: Jan 2006
Posts: 17
Likes: 0
Default 5.2 98 dakota vs 01 5.3 chevy

my friend just got a lowered 01 chevy truck 1500 with the 5.3 and auto trans 45k miles has exhaust. he wanted a piece of the old cast iron brick they call the 318. the trucks are pretty evenly matched other than mine having 3 times the amount off miles. he has a LSD rearend and i dont, he has 3.73 gears and i have 3.55s.

the first race i had him to 60mph by a truck length but than the 230hp the 318 makes vs the 295hp the 5.3 makes, he begins to pull on me, i still beat him though. we 1/4 his truck on the G-tech and he ran a fastest of 15.65 at 86mph and a constant 15.9 after that. my truck runs 15.8 at 87mph. he is lucky cause he can launch his truck 2000rpm and the tires hook. i have to launch mine a 1200rpm and give it half throttle till 10mph before flooring it.

chevy 5.3 all aluminum 295hp 325tq 4x2
dodge 5.2 all cast iron 230hp 300tq 4x2
my truck is lighter by about a hundred pounds.
Reply
Old Jan 22, 2006 | 01:55 AM
  #2  
Tan327's Avatar
TECH Fanatic
iTrader: (15)
 
Joined: Nov 2005
Posts: 1,754
Likes: 0
From: Arkansas/Germany
Default

I take it both of these are single cab? If so he should be running low 15's, good kill though.
Reply
Old Jan 22, 2006 | 10:48 AM
  #3  
bluecajun5.3's Avatar
11 Second Truck Club
20 Year Member
iTrader: (31)
 
Joined: Jan 2005
Posts: 5,861
Likes: 0
From: Breaux Bridge, LA
Default

01 5.3 is a cast iron block w/aluminum heads that has 285hp/325tq.
do a lil reseach first. oh, good race by the way...
Reply
Old Jan 22, 2006 | 12:15 PM
  #4  
Tool's Avatar
Thread Starter
Teching In
 
Joined: Jan 2006
Posts: 17
Likes: 0
Default

both trucks are club cabs. sorry i thought that they were all aluminum. what year did they make them all aluminum? his truck runs really good and he doesnt break traction off the line like i do. now the race is on between me and him. he has one win and i have one so were even. i was just happy he didnt rip my doors off and the 5.2 still has the power to run with the new bread of motors.
Reply
Old Jan 22, 2006 | 02:15 PM
  #5  
nifty03's Avatar
Teching In
 
Joined: Oct 2005
Posts: 9
Likes: 0
Default

ooo i was there...it was cold and i had to walk
a$$holes
Reply
Old Jan 22, 2006 | 05:50 PM
  #6  
hockeyplyr591's Avatar
Teching In
 
Joined: Jan 2006
Posts: 26
Likes: 0
Default

Originally Posted by Tool
both trucks are club cabs. sorry i thought that they were all aluminum. what year did they make them all aluminum? his truck runs really good and he doesnt break traction off the line like i do. now the race is on between me and him. he has one win and i have one so were even. i was just happy he didnt rip my doors off and the 5.2 still has the power to run with the new bread of motors.

dont forget i have that tonneau cover and the rims so it might be a little more than 100 lbs...

Last edited by hockeyplyr591; Jan 22, 2006 at 05:55 PM.
Reply
Old Jan 22, 2006 | 05:58 PM
  #7  
hockeyplyr591's Avatar
Teching In
 
Joined: Jan 2006
Posts: 26
Likes: 0
Default

Originally Posted by nifty03
ooo i was there...it was cold and i had to walk
a$$holes

*****
Reply
Old Jan 22, 2006 | 06:19 PM
  #8  
nifty03's Avatar
Teching In
 
Joined: Oct 2005
Posts: 9
Likes: 0
Default

u were in ur truck with the heater on and u call me a ***** it was like in the 20s
Reply
Old Jan 22, 2006 | 07:00 PM
  #9  
Tool's Avatar
Thread Starter
Teching In
 
Joined: Jan 2006
Posts: 17
Likes: 0
Default

bring it chevy boy!! i was goin relocate the ATI? sensor to the intake tube when i dropped the sensor down into the black hole (dakota engine bay) so there is no more ATI sensor . we should go out next weekend and run them again. looking to run 12s flat with just a heavier right foot.
Reply
Old Jan 22, 2006 | 07:01 PM
  #10  
1979rs/z28's Avatar
12 Second Club
iTrader: (21)
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: Beaufort NC
Default

good kill
Reply



All times are GMT -5. The time now is 12:47 AM.