short bed conversion in one day. this is Jeff's truck he drove down from San Francisco on Sunday I started today at 7 and finished just before 5 and now he's on his way home

 

. .

 

Thats gotta be a pain in the butt to paint the motor but it looks good.

 

I build a roof rack and installed bullhorn

 

I went to adams motorsports partk on Tuesday here is video youtube.

 

b

I installed a 3 inch spacer and stretch the arm's a inch and a half to center the wheel on the fender

 

a couple months ago I went adams motorsports partk where they have time attack on Tuesdays nights and I'm hook for 60 bucks you get 3 hours of non-stop adrenaline rush here is video youtube.*
Right after that I started collecting part off of Craigslist

I got use set for Jesse James wheel 20x10 with Tires there 28 inches tall not a good combination with a 5-speed and 410 gears. I found a first gen rear end with 307 Gears

 

1st gen rear end with 3.07 gear and engine rebuild kit with 40 over pistons

 

installed the jesse james wheels and lower the front 2". I'm going to drop the rear about 10"

 

5

1st gen rear end 2nd gen hubs 3rd Gen front disc brakes on the rear.




Modified the fifth wheel hitch started on the 4 link