Not sure where this project will go, if anywhere, but...
Sep 13, 2011 | 12:56 PM
#14
Thread Starter
formerly Moze (2/24/2012)
iTrader: (22)
Joined: Apr 2006
Posts: 490
Likes: 0
From: Mesquite, TX
Got the truck tuned today. Virgil did an awesome job. Unfortunately I'm running 87 octane...not to mention the truck has 3:23's in it, so the bottom end pretty much sucks. I'm going to try to track down some 3:73's.
I also replaced all of the shocks. It had Belltech's on there and three out four were absolutely shot. Replaced them with Monroe Sensa-Trac's, removed the rear bump stops (they were way too close and didn't have any more material to cut off), and it rides like a brand new truck. Also got the front wheels balanced and it took away the shake I was having at 60+mph. Getting the rotors turned this week and then I'm going to add some sound deadening material.
I also replaced all of the shocks. It had Belltech's on there and three out four were absolutely shot. Replaced them with Monroe Sensa-Trac's, removed the rear bump stops (they were way too close and didn't have any more material to cut off), and it rides like a brand new truck. Also got the front wheels balanced and it took away the shake I was having at 60+mph. Getting the rotors turned this week and then I'm going to add some sound deadening material.
Thread
Thread Starter
Forum
Replies
Last Post