Phantom

iTrader: (16)

This will be it for awhile until it's time for a motor. I've had the truck since Feb. '07 and it's seen many changes. But, I have never really done anything in the looks department so I'll cover that this time around too...This is what I started with...


Looks wise it's getting/has

Exterior
275/60-17 Falken Ziex tires (have)
Cadillac wheels painted black (need to paint)
Cut a half coil off the front springs (need to do)
Lower valence (have)
BLACKED OUT - Bumpers, lower valence, bumper pad, darker tint

Interior (done)
Sony Xplod Head Unit
Kicker 150.2 amp
Kicker Comp VR 10" sub
Miscellaneous interior LED's

Performance
5.3L (installed)
Rod bolts (installed)
TDP P&P and milled 241's ~ 10.5:1 CR (installed)
2001 Z06 cam (installed)
TrickFlow Pushrods
CAI (installed)
Coated Pacesetters (installed)
Dual 3" mandrel bent exhaust w/flowmasters (installed)
Built408 built 4L60e (installed)
Circle D 3000-3200 verter (installed)
Auburn Pro Series diff w/4.56 gears (installed)
DTR81 Traction Bars (installed)
28x10-15 Hoosier DO6 slicks (have)

To be installed
230s duration cam(not trying to be secretive just don't know exact specs, i'll post them when i look at the card)
Single fogger nitrous system w/15lb bottle
28x10-17 Hoosier DO6 Slicks

I'll be sure to post pics along the way. Not trying to set records with it anymore because I just don't care about that stuff at this point. I just want to drive it and have some fun with it. I do however have some goals with it. I expect it to make ATLEAST 375rwhp NA and I'd like to run an 11.999 atleast once. Not gonna be upset if I fall short, but I believe these are obtainable goals.

Gotta thank my bro Tyler (dirt track racer) for all the time he's put in on this thing. Without him, no tellin where it'd be. Also D&G Dyno for lettin us use his shop and dyno and Red Truck for draggin my *** and getting me motivated to do some work on this thing

Spoolin

iTrader: (8)

So's the 408 in there or no?

slamdlsx

iTrader: (13)

how you like that stall? is that the one from circle d that runs 375 shipped?

dirt track racer 81

iTrader: (45)

Howd you know.. hes tryin to be secretive dick..

Phantom

iTrader: (16)

yep thats one. i like it quite a bit. i cut a 1.99 60' with it on the tires in that picture i posted above. I will be going bigger though prolly


Here's a pic after a quick wash on my lunch hour

slamdlsx

iTrader: (13)

im considering buying one since they say it will stall higher behind my 5.7 with cam

Phantom

iTrader: (16)

kinda depends on your gearing, but yes thats possible

LsxCody

iTrader: (3)

Thought you were doing a rearmount

dirt track racer 81

iTrader: (45)

You ever going to get a lower valance on that?

Phantom

iTrader: (16)

was going to but kinda lost interest for a bit, then some guys around here started playin with their trucks and nitrous is just alot easier