WOW looks good, anything done to the engine inside other than the cam? Did you get the cam from stock48?

 

Yea he hooked me up with cam and the springs, great guy and they worked well for him so ill give them a try. Ill be pulling everything here in awhile ill put some pics up of the swap and ill have questions im sure. Thanks again for all the help fella's kinda a group effort on how my setup is going to go, first time doing any kind of engine or tranny swap should be interesting. Thanks again guys

 

Made some progress about rdy to pull the motor this is where im at.

 

I got the new cam and springs already in. What does everybody use to clean the intake because mine is nasty. Should have everything out tonight and the new one dropped in after the big dinner tommorow. Thanks gents

 

looks like a fun project.
i have used brake cleaner to clean my intake.
it worked fine and didnt dmaage anything.

 

Ran into my first problem. I got these 42lbs injectors and they dont fit or even plug in to the pig tails. Any idea on what i can do to get these to fit? I need to get my truck done here before the 4th of Dec and dont have time to wait on shipping is there anything i can do or am i screwed??

 

Heres what im working with....

 

Just go to the junkyard and find 8 new pigtails that fit them. They are a very common connector style. Cut and splice. Next go to a hardware store and buy some black pipe is something like 5/16". Cut 8 pieces to 5/8" tall. Find bolts in the same thread as your current injector rail bolts except 5/8" taller and bolt everything together. Easy swap.

 

pppppppppppppppppppppppppppppppppppppppppppppppppp pppppppppppppppppppppppppppppppppppp

 

Im using the same setup as one of the members on here his ran real quick with the same setup the cam works great with boost which is what im doing in the long run.