jgh64pkup

Im glad, seeing I just built it for the 80e a month ago.

Tech@B&M Racing

That's awesome. The B&M shifter looks wonderfully out of place. When people see that, they'll know something is going on. Enjoying following this thread.

jgh64pkup

Thanks Ron, it works perfect after flipping the arm around!

jgh64pkup

Not a huge update or anything, but I did get a few parts in yesterday. I got my shift handle, clutch line, master cylinder, and pilot bearing. Im still waiting on some bolts and a clutch alignment tool. Only pic i got was of the shift handle.

jgh64pkup

I also picked up 9" out of a 81 f150. Its only 3/8" wider on each side so it should fit great.

jgh64pkup

I bought some 3/4 round bar and my boss milled the bottom, and drilled and tapped some holes to fit the shifter arm. Now we just have to cut to length and thread the end of the rod.

Vortec350ss

iTrader: (20)

Cool truck!

jgh64pkup

Thanks! And also thanks for the thread title change.

jgh64pkup

Finally got my flywheel and pressure plate bolts.


Then I got the transmission back in. Looks like i'm either going to have to modify the exhaust or the trans crossmember.



Heres a shot of the new shift handle. still need to bend it, cut it to length, and thread it.

jgh64pkup

No new pics but I managed to get the exhaust and crossmember to fit, driveshaft in, and Slave cylinder bled.