Few more parts showing up, hope tomorrow to get some work done on it, and by the end of the weekend to make some good headway.
https://cimg0.ibsrv.net/gimg/www.per...d445392677.jpg

https://cimg6.ibsrv.net/gimg/www.per...a5553a8400.jpg

So I don't have a bead roller, and when I cut the charge pipes I need someway to put a ridge back into them. So I made this today. Will see how it works tomorw. In the background you can see the test pipe I had, but t was a little thicker wall than the charge pipes I have.https://cimg1.ibsrv.net/gimg/www.per...f2c8ba6dfa.jpg

Making good progress

thanks man👍👍

So had a few setbacks but trying to keep moving. Bends and tube showed up for the manifold as I just wasn't happy with that rigged thing I had made. Anyways I got part way done and ran out of argon so I'll get more tomorrow and try to get it welded up.

https://cimg9.ibsrv.net/gimg/www.per...edb82f1c74.jpg
https://cimg1.ibsrv.net/gimg/www.per...6e210235f6.jpg

https://cimg7.ibsrv.net/gimg/www.per...64b910e8a1.jpg
https://cimg0.ibsrv.net/gimg/www.per...01a2edd629.jpg
https://cimg2.ibsrv.net/gimg/www.per...3fabc725e2.jpg
https://cimg4.ibsrv.net/gimg/www.per...82f10e8a89.jpg

So I've been busy building other people's trucks. But tonight I got an hour or so to work on mine again. I changed up the manifold a little.
https://cimg7.ibsrv.net/gimg/www.per...f764960d36.jpg
https://cimg9.ibsrv.net/gimg/www.per...8715a19719.jpg

https://cimg0.ibsrv.net/gimg/www.per...edf029129.jpeg
https://cimg2.ibsrv.net/gimg/www.per...306b2ba61.jpeg
https://cimg4.ibsrv.net/gimg/www.per...66b9f7ea4.jpeg
https://cimg7.ibsrv.net/gimg/www.per...c9b06754a.jpeg