When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I started this project about the time I joined the forum a year ago. It finally is on the highway.
I started with a 1999 Tahoe 2 Dr Sport 4WD that had a shot 5.7 Votec 4L60E. I installed a 2006 LS2 6.0L from a Corvette that had a Manual Tranny. I kept the 4L60E.
It was quite an undertaking. My first one of these. Learned a lot along the way. If I do one again it will be so much easier.
Wiring Harness and Computers came from Current Performance. The Original computer wasn't used for anything after the swap. It may be needed (More on that in a question in the forum).
ECM/TCM are new but originally for a trailblazer.
Engine Mounts and A/C compressor relocation mount is Dirty Dingo.
Air intake is from Spectre. They were very helpful.
At present, Everything is fully operational and works great with the exception of the 4 wheel drive (question coming in another forum).