First Time Setup
 

If I were to be looking to do a simple nitrous setup (100-150shot) would this get the job done? and would I need anything else?

Proton Plus Kit with Bottle
PROTON PLUS NITROUS SYSTEM W/ 10LB BOTTLE

TPS WOT/Window Switch
NX DIGITAL RPM WINDOW SWITCH (Now for all ignition types - No RPM chips required)

yup that will take care of it! make sure you pull some timing out of your tune....typically 2 degrees for every 50hp you plan to spray!

to pull timing the lnc2000

Timing will be done thru an alternate tune I'll load at the track.

You cheater you took the easy way out to make power

:D The truck daily's perfect with the current power, just need something extra to keep up with you and diesels at the track.

That will make for a great setup to start with!! A lot of people like to add a bottle warmer, pressure gauge and purge kit later on down the road.

Do forum members get any discounts?

I've been eye balling this kit to for some cheap power until I funds allow f/I. Let us know if you pull the trigger.

Nitrous express makes nice stuff, but I recommend the ZEX wet kits. 3 wire hook up, built in programmable TPS WOT switch. Super easy to installl and very reliable. I have probably installed 20 of these kits. :) If you can afford it just get a bottle heater right away. I do not recommend the ZEX bottle heater, its slow and doesnt get very hot. These work very well below.

https://www.dynotunenitrous.com/stor...p?idproduct=17

well I plan on biting the bullet and ordering this stuff by the end of the week.

I'd also recommend checking out Zex. N2o is fun!! Do you have a preference between wet or dry?

I'm going with how I like my women, wet.

Look into inductions solutions for n20 setups

their pricey imo

also the best there is

They certainly do have quality kits by the looks of it.

But needless to say I'm not made of money, so I pulled the trigger on the NEX kit and the tps/window switch, also got a bottle pressure gauge.

My build thread will be updated soon