So i need some advice on what to put on my tranny since i plan on putting a 50 shot in my truck very soon. I bought a EFI kit off my friend and was curious if i would be needing other parts as well? I'm new to this whole spraying, so please inform me on how much this shot will help out and what can be done to get my 5.3 to take possibly a 100 shot?

 

Well I just got my nitrous kit workin yesterday on my truck. Its on a 50shot right now. It was definatly noticeable but nothing jaw dropping. Probably need to dial in the tune and get the jetting right. Only thing my trans has is a 40k aux cooler and a vette servo with the line pressure upped some.

 

ok, well heres the real question i was wanting to ask without getting my head bit off. How can i hook up my own nitrous system? i've called the only place around here which is in kingsville and the guy says he can hook it all up for me for $750? Now for that price i rather learn how to do it myself and spend the 750 building up the trans some. I've actually seen my brother hook up 3 systems and helped him but i wasnt all into it thinking i'd some day be doing it to my own vehicle. Im also trying to keep it on the down low, so i have yet to ask him lol.

 

Heres the wiring diagram that I used- assuming you have a basic kit...

 

thanks that should help a lot. On a scale from 1 - 10, how hard was it for you and how long did it take? do you happen to know what you run on the bottle?

 

Its probably a 5 on the scale. Only cause I dont like wiring. It took me about 8hrs total to install. I did a really clean job of it. Other than that it was fairly simple. I ran a 9.9 in the 1/8 before headers. Headers and the added 50ish shot probably dropped me to a 9.5 or better. I mostly do highway rolls at 40 and have beat 9.0s cars off bottle.