New from TX, trying to locate Regency RST roll pan trim
 

Hi all, been a lurker for some time and finally decided to become a member, I am hoping the PT community can help me locate RST roll pan trim. I know it may be a long shot but it's worth a try. Thanks.

Welcome to site!

Try this :
Catalog Item - Unique Concepts

I called with no luck lady said it's been discontinued. Thanks for the link.

After some time searching I located 2 trim pieces the license plate and one of the exhaust trims. With no luck locating the 3rd One I decided to make my own. It took some time figuring out how I was going to cut it. I ended up using my router to make the profile and a propane torch to bend it.

Here is how it turned out.

https://cimg4.ibsrv.net/gimg/www.per...802d559870.jpg

https://cimg6.ibsrv.net/gimg/www.per...c3474c05fa.jpg

https://cimg0.ibsrv.net/gimg/www.per...9573da7a54.jpg

https://cimg2.ibsrv.net/gimg/www.per...9224bf7257.jpg

That's F'n sweet!!!!!!!


Now make 100x more of them and sell them here ;)

https://cimg5.ibsrv.net/gimg/www.per...e11ed82dce.jpg


For being the first one it came out ok.

welcome to the site! Fellow Texan and SIG owner here haha

Ditto that . To both. Your trucks good

Thanks for stopping by. Not much going on just a few pictures of what I am working on at the moment.
https://cimg4.ibsrv.net/gimg/www.per...db92ffdc95.jpg

https://cimg6.ibsrv.net/gimg/www.per...7c839b5f0e.jpg

https://cimg8.ibsrv.net/gimg/www.per...7c9ff8d61e.jpg

https://cimg0.ibsrv.net/gimg/www.per...aea22a4afb.jpg

https://cimg1.ibsrv.net/gimg/www.per...07c279ff16.jpg

https://cimg2.ibsrv.net/gimg/www.per...27f1fd176c.jpg

What a night and day difference! Looking sweet! What brake setup is that?