New from TX, trying to locate Regency RST roll pan trim
 

Hi all, been a lurker for some time and finally decided to become a member, I am hoping the PT community can help me locate RST roll pan trim. I know it may be a long shot but it's worth a try. Thanks.

Welcome to site!

Try this :
Catalog Item - Unique Concepts

I called with no luck lady said it's been discontinued. Thanks for the link.

After some time searching I located 2 trim pieces the license plate and one of the exhaust trims. With no luck locating the 3rd One I decided to make my own. It took some time figuring out how I was going to cut it. I ended up using my router to make the profile and a propane torch to bend it.

Here is how it turned out.

https://cimg4.ibsrv.net/gimg/www.per...802d559870.jpg

https://cimg6.ibsrv.net/gimg/www.per...c3474c05fa.jpg

https://cimg0.ibsrv.net/gimg/www.per...9573da7a54.jpg

https://cimg2.ibsrv.net/gimg/www.per...9224bf7257.jpg

That's F'n sweet!!!!!!!


Now make 100x more of them and sell them here ;)

https://cimg5.ibsrv.net/gimg/www.per...e11ed82dce.jpg


For being the first one it came out ok.

welcome to the site! Fellow Texan and SIG owner here haha

Ditto that . To both. Your trucks good

Thanks for stopping by. Not much going on just a few pictures of what I am working on at the moment.
https://cimg4.ibsrv.net/gimg/www.per...db92ffdc95.jpg

https://cimg6.ibsrv.net/gimg/www.per...7c839b5f0e.jpg

https://cimg8.ibsrv.net/gimg/www.per...7c9ff8d61e.jpg

https://cimg0.ibsrv.net/gimg/www.per...aea22a4afb.jpg

https://cimg1.ibsrv.net/gimg/www.per...07c279ff16.jpg

https://cimg2.ibsrv.net/gimg/www.per...27f1fd176c.jpg

What a night and day difference! Looking sweet! What brake setup is that?

Thanks. It's a Rotora BBK with 8 piston calipers.

A little update finished the fronts and started on the rears.

https://cimg5.ibsrv.net/gimg/www.per...f38c6cd4d3.jpg

https://cimg0.ibsrv.net/gimg/www.per...940054b92c.jpg

https://cimg1.ibsrv.net/gimg/www.per...e5f8d1df72.jpg

https://cimg4.ibsrv.net/gimg/www.per...5d17ebe102.jpg

What wheels are these? I see they are intro's but can you share specs on width and backspacing? They look great!

Thanks.

https://cimg2.ibsrv.net/gimg/www.per...2d976f898d.jpg

They are intro ID 313, 22x9 6" backspace 265/40r22 front, 22x10 4.25" backspace 305/35r22 rear.

Forgot to mention they are 3 piece, so the lip you get will differ from when ordering welded. Welded gets you more lip.

The RST Roll Pan Trim, Looks great, I was wondering if there is anyway that I can get one from you. I was in the same position that you were, I have the drivers side I need the passenger side. If there is anyway you can help, please let me know. I will buy a set from you. Thank you BobbyRed...
My E-mail is Bobbyred54@yahoo.com

Valence
 

Hey man was wondering where you got your valence from or where I could get the fog housing. Mine broke and can’t find a replacement. Thanks in advance

Unique Concepts

Stolen please share. If any one in Dallas has seen it please call police. AH64188!!!!

damn, I hope you recover this truck.