Need help/ advice hypertech, corvet servo 2006
#1
Need help/ advice hypertech, corvet servo 2006
Hello everyone. Need some help I currently have 06 silverado 4.8 aem brute force intake, jba shorty headers, flow master, and corvette servo. My friend gave me his hypertech and I tuned it for 87 octane for now and after market tires, 25% shiftfiness. My question is will messing with the firmness be bad for my transmission since I already have the corvette servo? I didn't really mess with anything else since I don't know what really to do. I.e. Shift points and all that. Thank you for your help
#4
Welcome! I have been reading some people say 50% is fine and others say 100% is okay, personally I wouldn't take it above 50%
For the rev limiter, if you are able to choose I would have 1-2 shift at 6000 you can go to 6200, but I would NOT go any higher than that with the stock cam and weak valve springs, plus the power starts to fall on its face around 6000 rpms
For the rev limiter, if you are able to choose I would have 1-2 shift at 6000 you can go to 6200, but I would NOT go any higher than that with the stock cam and weak valve springs, plus the power starts to fall on its face around 6000 rpms
Thread
Thread Starter
Forum
Replies
Last Post