2000 Silverado an fitting 15x8s HELP
#1
Registered User
Thread Starter
Join Date: Aug 2022
Location: NC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2000 Silverado an fitting 15x8s HELP
I have just got a 2000 regular cab Z71 longbed that’s a 5speed , it had mismatch wheels on the factory rims at first an the truck would shake bad when getting up to like 45-50 an I noticed the rear tires were bl racking bad I’m hoping it’s the wheels an I’m wanting and HAVING to use my 96 tahoes chrome bullet holes on 32s but my truck of course is the 16inch factory with the disc brakes , I put them all on an it looked like the fronts cleared by a tiny bit but iv been grinding the rear an I put a 1/4inch spacer on both sides in the rear to help, it’s still rubbing a bit I haven’t drove down the road yet I’d like to have it not rubbing or making noise before the test drive , will bigger 2inch hubcentric spacers get them where they need to be without grinding as much?
The factory set I took off.
The factory set I took off.
Thread
Thread Starter
Forum
Replies
Last Post