Here's how the old truck was running the other night. This was a run against a turbocharged Subaru Baja. I had a bunch of other runs too, It ran 8.0 four times, 8.1 once and a couple of 8.2s and a 8.3 (on a dead bottle) in the final round of eliminations against a Nitroused Corvette (got my *** handed to me).
As you can see (hopefully) from the video, we don't exactly have the best surface to run on, and the big bitch spins quite a bit out of the hole, so I think she could have run a 7, which she should do easily now, once I get the cam install finished and tuned this weekend.
http://www.csn.ky/V2/video.php?do=vi...ils&videoid=51

 

thats a scary looking track. And it looks like your truck hauls ***, is that a 6l80e?

 

lol damm thats a small track,,but your truck moves out good

 

It is a scary little track - I think the owner believes that's the way to make the 1/8 more exciting! Believe it or not, we've had a few guys come down from Florida and run in the fives on it! Mind you, one of them had to take his car back in pieces, but they swear they'll be back.

It is a 6L80E. It has a bit of a slip-shift into 3rd, as you can hear in the video, which I need to figure out how to tune out, if possible.

 

nice!! sounds awesome..is your muffler factory? i see you have headers and cutout is their anything else done to your exhaust?. let us know how that cam swap goes! awesome rig!

 

That 1-2-3 gear shift on that thing sounds mean. I can tell it probably pulls really hard the whole time.

 

"You are not logged in or you do not have permission to watch videos. "

i get this tryin to watch the vid....

 

x2 for me. Do I have to log on? Love to see it, thanks!

 

http://www.youtube.com/watch?v=Zk3sE-nq36c

 

Sorry about the lousy link guys. I tried it myself a while ago and it took me to the same page. You have to click on the link at the top left hand side of the page that says "Denali vs. Baja" and that should take you to it.
It is the factory stock exhaust, but I have the cutout open when I run so it's pretty loud. I really need to figure out how to fix that shift, because it's probably stressful on the tranny and is probably losing some ET as well.
BTW: On those runs it was running a 10.4 AFR at high RPM's on my LM-2, so I know there was more left on the table, but I was too nervous to start leaning the nitrous jetting out. Hopefully the cam and a Wheatley re-tune will fix that high rpm richness.