MULTIMEDIA (truck related) Post your Truck pictures and videos (PG-13)

in the truck 1/4 mile tvs1900 4.8

Thread Tools
 
Search this Thread
 
Old Feb 27, 2012 | 09:34 PM
  #1  
schino's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
Default in the truck 1/4 mile tvs1900 4.8

supercharged 08 GMC ATCO NJ 2/25/12 - YouTube

from atco on saturday 2/25/12 opening day. i was first thing out on slicks and it didnt hold leaving off the 2 step
Reply
Old Feb 27, 2012 | 09:40 PM
  #2  
Mangled03gmc's Avatar
Baltimore Whore
20 Year Member
iTrader: (95)
 
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
Default

How many runs you get it? Seems like it was a short burn out. Truck sounds good though. What brand 2 step you have on the truck? That one snaps faster then my lingy. Soooo how fast you go?
Reply
Old Feb 27, 2012 | 09:59 PM
  #3  
schino's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
Default

got 12 runs. that was my first pass that day, it was pretty short the ones following were longer but didnt help any more. normally i go into 3rd in burnout but that was 2nd only. i had no 1.6x 60fts, the higher i set the 2 step the slower my 60ft because of spinning. its an msd and it hits hard and fast. that was at 2800 i think. that pass i think was 11.88 at 115
Reply
Old Feb 27, 2012 | 10:06 PM
  #4  
montecarloss's Avatar
LS ADDICT/BUILDER
iTrader: (18)
 
Joined: Oct 2006
Posts: 468
Likes: 8
From: TX
Default

nice pass, looking good
Reply
Old Feb 28, 2012 | 02:54 AM
  #5  
KDavis04ss's Avatar
TECH Resident
iTrader: (16)
 
Joined: Jul 2009
Posts: 790
Likes: 0
From: Brunswick, GA
Default

is the button on the steering wheel? hard to tell. good time out of that 4.8
Reply
Old Feb 28, 2012 | 04:54 AM
  #6  
schino's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
Default

no button on the wheel. after my burnout i flip a switch in center console to activate the system. there is a micro switch on the brake pedal so that when its pushed in the 2 step is activated. right foot to the floor, lift off the brake and it deactivates and goes. i could run off a button with line locks but im going to give this a shot.
Reply
Old Feb 28, 2012 | 06:34 AM
  #7  
custm2500's Avatar
Ph.D. in HUBRIS
iTrader: (10)
 
Joined: Mar 2009
Posts: 4,087
Likes: 5
Default

Good times. From the sound of it you should have a 10 sec truck on your hands with traction?

You should edit the video. It only takes two seconds to remove all that wait time.
Reply
Old Feb 28, 2012 | 07:03 AM
  #8  
foose04's Avatar
TECH Fanatic
iTrader: (3)
 
Joined: Dec 2009
Posts: 1,560
Likes: 3
From: Charleston, SC
Default

Truck sounds angry!
Originally Posted by Mangled03gmc
Seems like it was a short burn out.
Man got 12 runs in, have to save the rubber! I'm one of those 3 pass or so kind of guys. If good things haven't happen by then, then I wasn't ready to come to the track in the first place.
Reply
Old Feb 28, 2012 | 10:58 AM
  #9  
schino's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
Default

Originally Posted by custm2500
Good times. From the sound of it you should have a 10 sec truck on your hands with traction?

You should edit the video. It only takes two seconds to remove all that wait time.
thank you. it does sound faster then it is. there was a big audi meet there so i had to throw in some intimidation factor. esp when i was treeing the **** out of them they had no chance. on e85 with the boost upped to 16-17 and on spray it should do a 10 something but as it sits now if leaned out a little more will go 11.70's

i was trying to edit it but my desktop was acting up and didnt feel like getting the laptop.

Originally Posted by foose04
Truck sounds angry!


Man got 12 runs in, have to save the rubber! I'm one of those 3 pass or so kind of guys. If good things haven't happen by then, then I wasn't ready to come to the track in the first place.
LOL no kidding on the rubber! luckily these are C07 compound so a little bit harder but holy hell i pulled a handfull of rubber off of the bottom of one bed side let alone the wheel well. im running a points series this year so i was workin on my rt and figuring a dial in (pretty much bracket racing myself) the rt on this pass was horrible but was my first hit on a pro tree and i was def not ready
Reply
Old Feb 28, 2012 | 11:09 AM
  #10  
schino's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Jul 2008
Posts: 1,103
Likes: 0
From: flemington nj
Default

as the track got a little better and i left easier i fell into some consistency. heres a few good consecutive slips #9209

Reply



All times are GMT -5. The time now is 02:52 AM.