I was looking at the old post you had for the whipple supercharger spacer. Could you give me a price to have one made for a Gen 5 (L86) with a whipple. Not sure if I would use it for extra fuel or meth injection. Any inport from your end would be greatly appreciated.
jadscoop

another question... do you still make plenum spacers? was set to get one through Ray, but long-story-short, that fell through... so if you already have a design for the TVS kits, that'd be awesome!

gracias for checking!

i accidentally sent a question to your vendor username page, but i can ask here...
any chance you'd have a used set of jackshaft TVS cogs (or know anybody with some)?
looking to trade my 1:1 10rib (+cash or buy straight up, if req). thanks!

Hi Richard this is Mike, we met when you came up to Boston a few weeks ago. I am looking at one of your threads about "heat exchanger from frozen boost". do you still have any pictures of that kicking around? stupid photo bucket wont let me see anything.

Sorry I didn't mention my 01 Sierra front is dropped 5"

Hello, I have a 2001 GMC Sierra regular cab SL step side with 5" on the front, Belltech 2" spindles and the 3" Pro springs with the spacers. The ride far as comfort really sucks but it handles very good, very tight and precise. Although I really enjoy the sporty driving feel I really can't see this being my daily driver much longer unless the ride comfort improves so would you be able to supply me with the parts to convert over to a coil over set or suggest a vendor and or supplier with the parts I would need. I would like to be at 4" of drop instead of 5" which I have now, so 2" from the Belltech spindles plus another 2" from what you would recommend. Going with a stud adaptor with the top mount. Would you be able to supply the parts.

atomic,

quick question.. I read your awesome writeup on hydrobooster install on your 04 Silverado. I have an 04 Silverado SS and wanted to ask if they same parts would apply to my vehicle before I ordered. I can't seem to get any answers regarding this. Thanks for your help
Bill

don't go to baileyton, grew up around there and run it a few times, shitty track. Post up next time up head to Huntsville like to see a few runs. Im in Decatur about 30 mins away

I've been following your old man truck thread and 3 questions
1. How are you tuning for the cut out, i thought you weren't suppose to run a cutout with a turbo.
2.can you launch in 4hi on a manual Tcase? and why that one and not a push button.
3. do you like the single cab over the ext cab?
I wanna sell my 00' 2wd single cab and get a 03 and up 4x4 single cab