Okay , good information out there. Sounds like the 243 win.. now just finding the right price and work the milling and p&p into my budget and it's done....
Will have them milled .040 , unless there is a problem....
Also.. any ideas if I would run a stall...looks like I'm going to need one if I want a bigger cam... your opinions ?
What about a TB stall?

Ski

 

A good budget stall thatwill drive almost like stock is the circle d 278mm lokk in to them you won't regret it

 

I sold a set of 243 LS2 heads complete for $400

If you can find a set of those and mill them you should see a nice gain

 

+1 on the circle d 278, great budget stall.