Hello all I have a question and hope to get some help. I have never put any kind of mods on a truck just Z and ta's

I have a 04 avalanche and have a cam that I may put in or may wait till I get another Z

what do you guys think I would need for this swap

cam is a 535/538 224/24 on a 112

springs ?

stall ?

would it req tunning to run or could i drive it till i had it tunned ?

yes I do have headers just waiting to put them on when i get vac in a few weeks

thanks for any input

sorry if I posted this in the wrong area

Thanks again Derek

 

a set of LS6 springs will be just fine.
your stall is ok unless you want a higher one.
tuning will bring out the most from the cam but you can still drive on it
till then.

 

thats what i wanted to hear thanks i just happen to have a set of ls6 springs sitting around from my old Z i may have to start a tear down on my vac next week

 

may want to get some hardened rods while your in there.

 

for sure I can't believe I forgot those thx