Cam specs and pics of t/ Lunati cam for my 418 paging SportSide lol
01-04-2006, 03:41 AM
#1
Cam specs and pics of t/ Lunati cam for my 418 paging SportSide lol
Well here is a pic of the "cam card" for the cam that is going in my 418. Since SportSide is the local cam guru I was wondering what you think of my cam selection for the 418 with a 3200 stall in my truck. While it is on a 112lsa which isnt that great for nitrous I am more worried about motor performance than nitrous performance. For some reason it had a little discoloration on the end not rust though.
SportSide I should have a dyno chart for you within the next month or so
SportSide I should have a dyno chart for you within the next month or so
01-04-2006, 12:13 PM
#3
TECH Fanatic
Join Date: Sep 2004
Location: Somewhere between Auburn, AL and Columbus, GA
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
the mods might have resized them. I am not a cam expert or anything but i think that it should work good. That cam in a 418 with a stall like you have should behave nicely. I wouldnt worry too much about the 112 and the nitrous, a lsa of 114 or 115 might be a little better, but not that much..I would rather have the extra lope instead of few hps.
01-04-2006, 05:56 PM
#5
This was always going to be a nitrous motor this summer I am either going to pull the engine and totally rebuild it or throw a set of hogger out 6L heads and an FI cam in it and throw the turbo that oyu have if you still ahve it when I get the money or get the new Whipple blower in 3.3L or 5L jsut depends on the money situation and all. I think it will work well since 2bseen is running a motor with 10 less cubes and basically the same cam but on a 113lsa and running mid 12s in his SSS so I think it will do well. He did tell me it spins all four on the street NA through most of first and all through second on a 150 shot so with a 250 shot imagine what its going to do
