Hey all, as stated in the title I'm looking to start a nice N/A project on my Yukon and to use as a DD.

Don't mind on spending $700 on a monthly basis, but would like to be able to come out with something that really turns heads.

So far mods I've got are:

Stock 3.73s
20" Rims - 285/50/20 tires
Comp Cams XR265H14 (212/218 .522/.529 114LSA)
AFE Torque Tube
K&N Panel filter
Gutted Cats
Tuning by yours truly

Here is the dyno results of above:


I'm looking to get a bigger cam in their soon, something with a higher lift. Stall convertor will come in later once I get my dyno graph and see exactly where I want to be.

Heads, well I know i should be running 243s since most 07+ 5.3L motors are running them, so a slight P/P in the near future, or set them out for something else...

Since there is no track where I'm at, I'm looking to make this a dyno queen. At least 400whp N/A. Is this possible?

Headers, Pullies, True Duals, Larger Cam and stall will be added in the near future. Anything else you guys can advise me to do add something? Please add to the post and I'll get working on it... Thanks!