new parts for the truck
#21
After adding the Vararam a while back my fuel trims were skewed 12%, that intake did the same on my 2007 Sierra Denali. Could be a lean code especially with today's so called E10. Get your buddy to re-cal the MAF Hz table and virtual VE tables with a wideband, you will notice a tremendous change in driveability, you might be a little lean now @ WOT...
Last edited by markislive78; May 30, 2010 at 01:11 PM.
#25
Thread Starter
11 Second Club
iTrader: (47)
Joined: Feb 2003
Posts: 3,957
Likes: 0
From: Kansas City, Mo
Took the truck to the track tonight....very humid but not impressed. 14.26@100.4mph was my best pass. My truck demands less fuel with the Vararam. Im taking it off and buying or making something better.
#26
Did you check your WOT AFR or retune after adding the intake?
Last edited by markislive78; Jun 3, 2010 at 05:21 PM.
#27
my A/F starts off at 12.8 at 2500rpm an by the time my pull is over its 12.0-12.1 then entire length of the Dyno run.
timing is another thing...make sure your not losing timing or the converter is locking too early.
timing is another thing...make sure your not losing timing or the converter is locking too early.
#28
Thread Starter
11 Second Club
iTrader: (47)
Joined: Feb 2003
Posts: 3,957
Likes: 0
From: Kansas City, Mo
Never even messed with the air/fuel untill after I did the intake. Its got a full tune now. Another thing that is weird is ONLY when im at the track the truck at times will shift very funky like have a huge delay. Does this tranny have an abuse mode or when it gets hot it does this? I think I need to put a cooler on it.


