Looking at getting an 07 Sierra AWD Denali. Just wandering how much you lowered your truck and which manufactuer did you go with. I dont want to go any lower than a 3/5.Thanks

 

i went belltech 3/5 front has spindles and adjustable belltech struts. and rear has 2" leafsprings, shackles and remove factory 1 " block for a total of 5" in rear with air shocks to raise when i tow. here 2 pic's of it just 3/5.. the third pic, i took out another ring on the adjustable front strut for 3.5" drop in the front. (pic was from my phone so not the best but gives u an i dea.) oh yea mine is a 2wd but the spindles from belltech will fit awd.

 

I like the way the truck is lowered have u got any tire clearness problems since u r using the 22" ??

 

thanks. no, no real major tire clearance isues it does have a slight rub when i turn all the way,(and when i mean slight i mean hardly nothing) but nothing major. over all not to bad. only real rub is when on the freeway going bout 70 mph+ and i hit a dip. it does rub up at the top. but it just hit the plastic around the wheels well.. but doesnt hurt the tire. it just moves the plastic up when that does happen. but its not bad enough for me to say i want to lift it back up..lol.. it rides sooper smooth.

 

Well my deal fell through on the sierra denali that I was going to get. I drove 2 hours, pulling my trailer, to pick up the truck but it was not as described. And this was at a new car dealership. Truck looked clean from the pictures and the salesman pretty much lied as to the condition of the interior. I'll keep looking.

 

My buddy and i just finished slamming his sierra denali awd, we did a 2" spindle and belltech struts w/ only 1 ring for a 2" =4" up front and in the rear did a flip w/ the lifting hanger set at 6" , btw this was done on 26's w/ a 295 35 26 and some trimming in the front. same type rubbing as Charlynali described

 

Charly, I must you have one of the nicest and cleanest Denali's I've seen bro! I love the stance on the 3rd pic, it looks perfect!

 

^^^THANKS Blue04SS!! HOW DO U LIKE UR BEDRUG AND CAP. IM THINKING BOUT GETTING ME THAT COMBO THIS CHRISTMAS.. LOOKS LIKE A CARS TRUNK!

THAT SOUNDS KILLER!! DID U GUYS HAVE ANY ISSUES WITH YOUR FRONT WHEELS SORT OF CAMBERING IN? I HAVE THE SAME SETUP ON MINE BELLTECH SPINDLE WITH BELLTECH STRUT. EXCEPT I HAVE TWO RINGS TO LOWER A TOTAL OF 3.5" WITH SPINDLE. AND MY CAMBER IS OF ALMOST 3 DEG. OFF AND SUPPOSEDLY THE GUYS AT FIRESTONE SAID IT HAD NO CAMBER ADJUSTMENT??? AND I WAS LIKE WHAT? CUZ A BUDDY OF MINE GOT HIS FIXED. BUT I HAVE THE LIFETIME ALIGNMENT DEAL FROM THEM AND IVE TAKEN IT ABOUT 4 TIMES TO GET IT ALIGNED. SO I DUNNO IF THEY ARE TELLING THE TRUTH OR THEY JUST DONT WANNA MESS WITH IT? LET ME KNOW IF U HAD ANY ALIGNMENT ISSUES. THANKS!

 

[QUOTE=CharlyNali6.2;4299546]^^^THANKS Blue04SS!! HOW DO U LIKE UR BEDRUG AND CAP. IM THINKING BOUT GETTING ME THAT COMBO THIS CHRISTMAS.. LOOKS LIKE A CARS TRUNK!


I love my Bedrug! this is the 3rd truck I've owned and the 3rd Truck that has had it! As for the Vinyl cover, it does come in handy, but love the look of the fiberglass Tonneau covers. Gives the truck a clean finish.

 

[QUOTE=Blue04SS;4299611]awesome! yea ill be looking into it if the christmas bonus is any good this year..lol.