A friend of mine ordered some parts for a cam swap. He decided on a 226/229 112LSA, PAC 1218 springs, and LS7 sprocket/bolt kit. Is there anything missing to get the swap done? I've done swaps on the 4.8L/5.3L variants but never on the 6.0L on these NBS trucks; am I missing anything?

 

Does anyone know if the LS7 sprocket is ok on this truck? Found out it has L92 heads so I got held back on the springs as my crane VS tool didn't work.

 

yeah the LS7 sprocket will work. did you get the new front cover?

 

I didn't get the front cover, is it necessary? Any problems without it?

Thanks!

 

i thought the 6.0 with L92 heads had VVT? if no VVT then no need for a cover