I'm not sure a 3600 stall is enough for a T-rex. Most recomend at least a 4000-4400 to get it off the line hard.

 

You will be waiting for a long time

 

the 3600 and t-rex wont be for the truck...it's already got a good cam, just needs a new converter. the truck will probably get the pt4200 out of the z28 and the car will get the py3600 for some nitrous use with a big cam.

 

I see this one getting locked pretty quick.

 

no reason to lock it....no feelings hurt yet, no major **** talk either. it's actually pretty civilized so far.

 

I say we gett-er done while Fast isn't around.

I have some land on a lake in Texas if anyone needs to dump anything.

 

snakeeater, you ran heads cam and a 225 shot and only went 12.89?

 

I am still on street tires. I spin quite a bit N/A much less with the 225. I dont start spraying till a little after i hit 2nd gear, and even then i spin really bad. I finaly hook good going into 3rd, and it takes off like crazy. My best 1/8 N/A was 8.8x, and with the 225 i get only 8.5s because of spining. My 1/8 mph is 89.6mph in that run.

All i can say is i need ET Streets!

 

damn man, get some slicks and you're in the 11s for sure....i ran a 7.55@92mph in my z28 on drag radials, with about 200+ pounds of cargo in the back so you're moving pretty good going by your trap.

 

The trap is awsome, but my trany is 100% stock. Not so much as a servo. I have a fluid cooler and some Lucas additive in it thats it. I just have a feeling with slicks spraying off the line it will break for sure.