Big Tap

iTrader: (3)

I'm putting the a Street Scene SS bumper cover on my '02 Tahoe and am trying to install fog lights in the brake vent holes. I bought stock fog lights for an '04 Chevy truck thinking that they would fit since it was a similar looking hole on the '04 bumper, but they are too large, even if I was to trim some of the bumper cover.
I'm considering trying to get some NNBS Chevy fog lights to see if they would fit any better. They look to be a little smaller, but I hate to buy them only to have to return them because they don't fit. Does anyone with a NNBS have the measurements on these lights? Better yet, has anyone put fog lights in one of these bumpers and knows what lights fit the best? Any help is appreciated. Thanks!

95 bright teal

they should fit with trimming here is what another guy did
https://www.performancetrucks.net/fo...+bumper&page=2

02BlueStepside

iTrader: (1)

They do fit, like said just have to do some trimming. I know GMRacer did this on his street scene cover so maybe shoot him a pm. All others I have seen done I believe were on the oem ss cover

Big Tap

iTrader: (3)

Thanks guys! I sent him a PM. Hopefully this will shed some insite. I'm nearing the completion on what has turned out to be pretty much a complete tear down and re-do of the exterior of my Tahoe. This is one of the little touches that I hope will make it look even better!

magnetized

iTrader: (5)

I just needed to do a little trimming to make mine fit fine, I'd think the 99-02 SS cover would be similar

pimp ss

you can also rework the brackets and move the lights back rather than cut the bumper