Does anyone know how (if its possible to do without taking it to the dealer) to program the remotes for keyless entry on a 2000 Silverado?? One of mine took a crap about a month ago...and now the second one crapped out too! I can't have anything! Thanks in advance.

 

the guy at the dealer showed me how for free, but i forgot... i sat in the truck with him...

it something like turn the key to on, as far as it will go without starting, then press the unlock button three times and hold until the lights flick then hold both lock and unlock buttons togther on new remote with it facing the radio until lights flicker again...

its something like that... i dont know if its the way to do it or not... cant totally remember

 

Transmitter Programming
Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON, OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
Hold down the keyless entry transmitter LOCK and UNLOCK buttons for 15 seconds. The locks will again cycle once.
Repeat step #2 for each additional keyless entry transmitter.
Turn the ignition on to exit the keyless entry transmitter programming mode. Programming is now complete.

This is straight from the GM computer that we use at work.

 

THANKS!!! That was fast service!...and it worked great!

 

No prob, any info that you need , or anybody in the matter about gm I can look it up and let you know.

 

I see you just joined the site. Let me say a "late" welcome to the site, it seems you are going to be a valuable addition! Thanks again bro.

 

Thanks, how do you change the message under my name. I cant find where you change it ??

 

damn... i was kinda close...

 

Only a moderator can do it. PM JSmith and maybe he can change it for you.

 

Cool thanks.