GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

Front end noise, Replaced everything, Still there!!!

Thread Tools
 
Search this Thread
 
Old May 12, 2016 | 07:38 AM
  #1  
willhorne22's Avatar
Thread Starter
Launching!
 
Joined: Feb 2015
Posts: 204
Likes: 14
From: Arkansas
Default Front end noise, Replaced everything, Still there!!!

Hey guys, I have a front end growl. I only hear it at slow speeds while turning or coming to a complete stop. I have replaced the Upper and lower control arms with MOOG. I replaced my torsion bar mounts. Took the grease boots off my Rare Parts tie rods and cleaned them out and ran all new grease through them. Replaced CV axles. I think i have narrowed it down to Brakes (Did a hydro boost swap or maybe something in my Front Diff (I re geared it to 4.56 not to long ago). When I replaced my axles I changed the diff fluid and everything looked and felt fine. I also replaced front hub assembly on driver side. This all started after I slammed into a huge pot hole dirt roading at night. The noise I'm hearing sounds like a growl or something possibly vibrating in the engine bay. Almost like a tire dragging the inner fender plastic but thats not it. Please throw some suggestions at me that I may be missing?. Could a pulsing or sticking caliper maybe cause this?

Last edited by willhorne22; May 12, 2016 at 08:47 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CF7GO
SHOW & SHINE DISCUSSION
15
Aug 15, 2016 09:53 PM
willhorne22
GMT 800 & Older GM General Discussion
4
Mar 4, 2016 04:47 PM
lxcoupe
GM Parts Classifieds
1
Mar 3, 2016 02:58 PM
jbat35
GM Drivetrain & Suspension
3
Feb 29, 2016 10:37 AM
69TA
GM Drivetrain & Suspension
3
Feb 23, 2016 09:23 PM




All times are GMT -5. The time now is 07:45 PM.